Chapter 3
Expressions and Operators
Expressions
An expression is any valid set of literals, variables, operators, and expressions that evaluates to a single value; the value can be a number, a string, or a logical value. Conceptually, there are two types of expressions: those that assign a value to a variable, and those that simply have a value. For example, the expressionx = 7 is an expression that assigns x the value seven. This expression itself evaluates to seven. Such expressions use assignment operators. On the other hand, the expression 3 + 4 simply evaluates to seven; it does not perform an assignment. The operators used in such expressions are referred to simply as operators.
JavaScript has the following types of expressions:
- Arithmetic: evaluates to a number, for example 3.14159
- String: evaluates to a character string, for example, "Fred" or "234"
- Logical: evaluates to true or false
Operators
JavaScript has the following types of operators. This section describes the operators and contains information about operator precedence.- Assignment Operators
- Comparison Operators
- Arithmetic Operators
- Bitwise Operators
- Logical Operators
- String Operators
- Special Operators
operand1 operator operand2For example,
3+4 or x*y.
A unary operator requires a single operand, either before or after the operator:
operator operandor
operand operatorFor example,
x++ or ++x.
In addition, JavaScript has one ternary operator, the conditional operator. A ternary operator requires three operands.
Assignment Operators
An assignment operator assigns a value to its left operand based on the value of its right operand. The basic assignment operator is equal (=), which assigns the value of its right operand to its left operand. That is, x = y assigns the value of y to x. The other assignment operators are shorthand for standard operations, as shown in the following table.Comparison Operators
A comparison operator compares its operands and returns a logical value based on whether the comparison is true. The operands can be numerical or string values. Strings are compared based on standard lexicographical ordering, using Unicode values. The following table describes the comparison operators.1
These examples assume that var1 has been assigned the value 3 and var2 has been assigned the value 4.
|
Arithmetic Operators
Arithmetic operators take numerical values (either literals or variables) as their operands and return a single numerical value. The standard arithmetic operators are addition (+), subtraction (-), multiplication (*), and division (/). These operators work as they do in most other programming languages, except the / operator returns a floating-point division in JavaScript, not a truncated division as it does in languages such as C or Java. For example:1/2 //returns 0.5 in JavaScriptIn addition, JavaScript provides the arithmetic operators listed in the following table.
1/2 //returns 0 in Java
Bitwise Operators
Bitwise operators treat their operands as a set of 32 bits (zeros and ones), rather than as decimal, hexadecimal, or octal numbers. For example, the decimal number nine has a binary representation of 1001. Bitwise operators perform their operations on such binary representations, but they return standard JavaScript numerical values. The following table summarizes JavaScript's bitwise operators.Bitwise Logical Operators
Conceptually, the bitwise logical operators work as follows:- The operands are converted to thirty-two-bit integers and expressed by a series of bits (zeros and ones).
- Each bit in the first operand is paired with the corresponding bit in the second operand: first bit to first bit, second bit to second bit, and so on.
- The operator is applied to each pair of bits, and the result is constructed bitwise.
- 15 & 9 yields 9 (1111 & 1001 = 1001)
- 15 | 9 yields 15 (1111 | 1001 = 1111)
- 15 ^ 9 yields 6 (1111 ^ 1001 = 0110)
Bitwise Shift Operators
The bitwise shift operators take two operands: the first is a quantity to be shifted, and the second specifies the number of bit positions by which the first operand is to be shifted. The direction of the shift operation is controlled by the operator used. Shift operators convert their operands to thirty-two-bit integers and return a result of the same type as the left operator. The shift operators are listed in the following table.| Operator | Description |
Example
|
| |
|---|
Logical Operators
Logical operators are typically used with Boolean (logical) values; when they are, they return a Boolean value. However, the && and || operators actually return the value of one of the specified operands, so if these operators are used with non-Boolean values, they may return a non-Boolean value. The logical operators are described in the following table.| Operator | Usage |
Description
expr1 && expr2
| expr1 || expr2
| !expr (Logical NOT) Returns false if its single operand can be converted to true; otherwise, returns true. |
|---|
a1=true && true // t && t returns trueThe following code shows examples of the || (logical OR) operator.
a2=true && false // t && f returns false
a3=false && true // f && t returns false
a4=false && (3 == 4) // f && f returns false
a5="Cat" && "Dog" // t && t returns Dog
a6=false && "Cat" // f && t returns false
a7="Cat" && false // t && f returns false
o1=true || true // t || t returns trueThe following code shows examples of the ! (logical NOT) operator.
o2=false || true // f || t returns true
o3=true || false // t || f returns true
o4=false || (3 == 4) // f || f returns false
o5="Cat" || "Dog" // t || t returns Cat
o6=false || "Cat" // f || t returns Cat
o7="Cat" || false // t || f returns Cat
n1=!true // !t returns false
n2=!false // !f returns true
n3=!"Cat" // !t returns false
Short-Circuit Evaluation
As logical expressions are evaluated left to right, they are tested for possible "short-circuit" evaluation using the following rules:-
false&& anything is short-circuit evaluated to false. -
true|| anything is short-circuit evaluated to true.
String Operators
In addition to the comparison operators, which can be used on string values, the concatenation operator (+) concatenates two string values together, returning another string that is the union of the two operand strings. For example,"my " + "string" returns the string "my string".
The shorthand assignment operator += can also be used to concatenate strings. For example, if the variable mystring has the value "alpha," then the expression mystring += "bet" evaluates to "alphabet" and assigns this value to mystring.
Special Operators
JavaScript provides the following special operators:conditional operator
The conditional operator is the only JavaScript operator that takes three operands. The operator can have one of two values based on a condition. The syntax is:condition ? val1 : val2If
condition is true, the operator has the value of val1. Otherwise it has the value of val2. You can use the conditional operator anywhere you would use a standard operator.
For example,
status = (age >= 18) ? "adult" : "minor"This statement assigns the value "adult" to the variable
status if age is eighteen or more. Otherwise, it assigns the value "minor" to status.
comma operator
The comma operator (,) simply evaluates both of its operands and returns the value of the second operand. This operator is primarily used inside a for loop, to allow multiple variables to be updated each time through the loop.
For example, if a is a 2-dimensional array with 10 elements on a side, the following code uses the comma operator to increment two variables at once. The code prints the values of the diagonal elements in the array:
for (var i=0, j=9; i <= 9; i++, j--)
document.writeln("a["+i+","+j+"]= " + a[i,j])
delete
The delete operator deletes an object, an object's property, or an element at a specified index in an array. Its syntax is:delete objectNamewhere
delete objectName.property
delete objectName[index]
delete property // legal only within a with statement
objectName is the name of an object, property is an existing property, and index is an integer representing the location of an element in an array.
The fourth form is legal only within a with statement, to delete a property from an object.
You can use the delete operator to delete variables declared implicitly but not those declared with the var statement.
If the delete operator succeeds, it sets the property or element to undefined. The delete operator returns true if the operation is possible; it returns false if the operation is not possible.
x=42
var y= 43
myobj=new Number()
myobj.h=4 // create property h
delete x // returns true (can delete if declared implicitly)
delete y // returns false (cannot delete if declared with var)
delete Math.PI // returns false (cannot delete predefined properties)
delete myobj.h // returns true (can delete user-defined properties)
delete myobj // returns true (can delete user-defined object)
Deleting array elements
When you delete an array element, the array length is not affected. For example, if you delete a[3], a[4] is still a[4] and a[3] is undefined. When thedelete operator removes an array element, that element is no longer in the array. In the following example, trees[3] is removed with delete.
trees=new Array("redwood","bay","cedar","oak","maple")If you want an array element to exist but have an undefined value, use the
delete trees[3]
if (3 in trees) {
// this does not get executed
}
undefined keyword instead of the delete operator. In the following example, trees[3] is assigned the value undefined, but the array element still exists:
trees=new Array("redwood","bay","cedar","oak","maple")
trees[3]=undefined
if (3 in trees) {
// this gets executed
}
new
You can use thenew operator to create an instance of a user-defined object type or of one of the predefined object types Array, Boolean, Date, Function, Image, Number, Object, Option, RegExp, or String. On the server, you can also use it with DbPool, Lock, File, or SendMail. Use new as follows:
objectName = new objectType ( param1 [,param2] ...[,paramN] )You can also create objects using object initializers, as described in "Using Object Initializers" on page 101. See
new in the Client-Side JavaScript Reference for more information.
this
Use thethis keyword to refer to the current object. In general, this refers to the calling object in a method. Use this as follows:
this[.propertyName]Example 1. Suppose a function called
validate validates an object's value property, given the object and the high and low values:
function validate(obj, lowval, hival) {You could call
if ((obj.value < lowval) || (obj.value > hival))
alert("Invalid Value!")
}
validate in each form element's onChange event handler, using this to pass it the form element, as in the following example:
<B>Enter a number between 18 and 99:</B>Example 2. When combined with the
<INPUT TYPE = "text" NAME = "age" SIZE = 3
onChange="validate(this, 18, 99)">
form property, this can refer to the current object's parent form. In the following example, the form myForm contains a Text object and a button. When the user clicks the button, the value of the Text object is set to the form's name. The button's onClick event handler uses this.form to refer to the parent form, myForm.
<FORM NAME="myForm">
Form name:<INPUT TYPE="text" NAME="text1" VALUE="Beluga">
<P>
<INPUT NAME="button1" TYPE="button" VALUE="Show Form Name"
onClick="this.form.text1.value=this.form.name">
</FORM>
typeof
Thetypeof operator is used in either of the following ways:
1. typeof operandThe
2. typeof (operand)
typeof operator returns a string indicating the type of the unevaluated operand. operand is the string, variable, keyword, or object for which the type is to be returned. The parentheses are optional.
Suppose you define the following variables:
var myFun = new Function("5+2")The
var shape="round"
var size=1
var today=new Date()
typeof operator returns the following results for these variables:
typeof myFun is objectFor the keywords
typeof shape is string
typeof size is number
typeof today is object
typeof dontExist is undefined
true and null, the typeof operator returns the following results:
typeof true is booleanFor a number or string, the
typeof null is object
typeof operator returns the following results:
typeof 62 is numberFor property values, the
typeof 'Hello world' is string
typeof operator returns the type of value the property contains:
typeof document.lastModified is stringFor methods and functions, the
typeof window.length is number
typeof Math.LN2 is number
typeof operator returns results as follows:
typeof blur is functionFor predefined objects, the
typeof eval is function
typeof parseInt is function
typeof shape.split is function
typeof operator returns results as follows:
typeof Date is function
typeof Function is function
typeof Math is function
typeof Option is function
typeof String is function
void
The void operator is used in either of the following ways:1. void (expression)The void operator specifies an expression to be evaluated without returning a value.
2. void expression
expression is a JavaScript expression to evaluate. The parentheses surrounding the expression are optional, but it is good style to use them.
You can use the void operator to specify an expression as a hypertext link. The expression is evaluated but is not loaded in place of the current document.
The following code creates a hypertext link that does nothing when the user clicks it. When the user clicks the link, void(0) evaluates to 0, but that has no effect in JavaScript.
<A HREF="javascript:void(0)">Click here to do nothing</A>The following code creates a hypertext link that submits a form when the user clicks it.
<A HREF="javascript:void(document.form.submit())">
Click here to submit</A>
Operator Precedence
The precedence of operators determines the order they are applied when evaluating an expression. You can override operator precedence by using parentheses. The following table describes the precedence of operators, from lowest to highest.| Operator type |
Individual operators
, = += -= *= /= %= <<= >>= >>>= &= ^= |= ?: || && | ^ & == != < <= > >= << >> >>> + - * / % ! ~ - + ++ -- typeof void delete () new . [] |
|---|
Table of Contents | Previous | Next | Index
Last Updated: 05/27/99 21:21:21
